Cartridges with accessories

A two-component epoxy system in a separate-chamber cartridge with internal mixing, featuring low viscosity for structural consolidation injections and bonding of cracks and fractures up to 2 mm wide. Solvent-free. It is used as a structural consolidant for cracks, fractures, and damage in flooring and construction in general; as an adhesive for bonding stone or marble elements (stairs, thresholds...), wood, tuff, etc.; and for bonding elements made of steel, concrete, and wood. The kit includes accessories: injection tube, non-return valves (nipples), and vent plug. The cartridge is extruded using a 250 ml silicone gun.

A two-component epoxy system in a separate-chamber cartridge with internal mixing, slightly thixotropic, designed for controlled injections for structural consolidation of cracks and damage without dripping. Solvent-free. It is used as a structural consolidant for cracks, fractures, and damage between 1 and 3 mm wide in flooring and construction in general; as an adhesive for bonding stone or marble elements (stairs, thresholds...), wood, tuff, etc.; and for the structural bonding of steel plates to reinforced concrete supports (béton plaquet). The kit includes accessories: a mixing rod to be screwed onto the cartridge head, an injection tube, non-return valves (nipples), and a vent plug. The cartridge is extruded using a 250 ml silicone gun.

A two-component adhesive mortar with internal mixing, based on vinyl ester resin, suitable for fast fixing on any construction material, particularly concrete and masonry. Solvent-free. It is used as an anchoring resin for nipples in Isoplam Ipm Epoxy Kit systems; as an adhesive for fixing dowels and general construction materials (thresholds, brackets, masonry, frames, profiles...); and as an adhesive for bonding heavy loads onto concrete, stone, solid and perforated bricks. The kit includes a mixing rod to be screwed onto the cartridge head. The cartridge is extruded using the Isoplam P10000000 coaxial gun (380 ml).