It is the smallest version of the Isoplam pumps and has a capacity of 0.5 l. The 500 ml conical sprayer is easy to handle and practical and is very useful in professional activities but also in hobby ones. The container of the small Isoplam sprayer is made of PE/PP plastic, the gasket is made of NBR nitrile rubber and is equipped with springs and balls in ASI 302 stainless steel. The small sprayers have the graduated scale notches marked on the container. The small manual pistol vaporizer has an adjustable jet and allows you to atomize liquids with a maximum jet width of 60°. The pumped capacity of the nebulizer is 5 ml/minute. The nebulizer is resistant to sea water, petrol, naphtha, detergents, herbicides, hydraulic oils, fuels, methanol... however, it is not suitable for use with acetone, white spirit, solvents, trichlorethylene, lacquers, ethyl alcohol. The pumps are reusable, taking care to wash them after each use and run them for a few minutes with clean water.

The 1000 ml conical spray nozzle is easy to handle and practical and is very useful in professional activities where a pump with high resistance to aggressive chemical fluids is required. The Isoplam spray bottle container is made of PE polyethylene plastic, the nozzle and head are made of PP polypropylene, and the needle spring is made of ASI 302 stainless steel; the o-ring gasket is made of FPM fluorocarbon, a high-performance rubber suitable for use with highly aggressive products (medium solutions up to approximately 10% of hydrochloric acid, caustic soda, petrol, diesel, quicklime, detergents, herbicides, oils plumbing and fuels, ethyl alcohol, white spirit, sea water). The pump is not resistant to acetone, ammonia, solvents, trichlorethylene, lacquers. The manual pistol vaporizer has an adjustable jet. The single capacity delivered by the nebulizer is 1.3 ml. The pumps are reusable, taking care to wash them after each use and run them for a few minutes with clean water.

The Isoplam 2000 ml pre-compression manual sprayer is easy to handle and practical and is very useful in professional activities where a pump with high resistance to aggressive chemical fluids is required. The Isoplam spray bottle container is made of PE polyethylene plastic; the nozzle, head and ergonomic handle are made of PP polypropylene; the needle spring and the valve are made of AISI 302 stainless steel; the pin is made of polyvinylidene fluoride (PVDF); the o-ring gasket is made of FPM fluorocarbon, a high-performance rubber suitable for use with highly aggressive products (medium solutions up to approximately 20% of hydrochloric acid, caustic soda, bleach, whitewash, disinfectants, petrol, diesel fuel, quicklime , detergents, herbicides, petroleum-based hydraulic oils, synthetic hydraulic oils, ethyl alcohol, white spirit, sea water). The pump is not resistant to acetone, ammonia, solvents, trichlorethylene, lacquers. The manual piston vaporizer can deliver at a maximum pressure of 2 bar, is equipped with a pressure relief valve and has an adjustable jet that can be oriented in all directions. The single capacity delivered by the nebulizer at a maximum pressure of 2 bar is 0.37 l/minute, with a maximum jet width of 60°. The pumps are reusable, taking care to wash them after each use and run them for a few minutes with clean water.

The Isoplam 6000 ml pre-compression manual sprayer is easy to handle and practical to use and is very useful in professional activities where a pump with high resistance to aggressive chemical fluids is required. The Isoplam sprayer tank is made of PE polyethylene plastic; the nozzle is made of PP polypropylene; the pumping element is made of plastic; the needle spring, the needle, the handle and the valve are made of AISI 302 stainless steel; the pump is equipped with an adjustable shoulder strap and a comfortable handle for transport and to better support the weight of the full pump; It is supplied with a 1.2 m long flexible hose, a 40 cm rigid lance with an adjustable polypropylene spray nozzle and a regulated pressure relief valve. cast at 3 bar; the o-ring gasket is made of FPM fluorocarbon, a high-performance rubber suitable for use with highly aggressive products (medium solutions up to approximately 20% of hydrochloric acid, caustic soda, bleach, whitewash, disinfectants, petrol, diesel fuel, quicklime , detergents, herbicides, petroleum-based hydraulic oils, synthetic hydraulic oils, ethyl alcohol, white spirit, sea water). The pump is not resistant to acetone, ammonia, solvents, trichlorethylene, lacquers. The manual piston vaporizer can deliver at a maximum pressure of 3 bar and has an adjustable jet that can be oriented in all directions. The single capacity delivered by the nebulizer at a pressure of 2 bar is 0.37 l/minute, with a maximum jet width of 60°. The sprayer pumps are reusable, taking care to wash them after each use and run them for a few minutes with clean water. Professional sprayers are sold complete with a multilingual instruction booklet.

The Isoplam 7 liter electric acid pump is a highly efficient battery pump, ensuring reliable and long-lasting performance. The 2 bar pressure and the diaphragm pump ensure uniform distribution of the acid, while the standard pressure switch and the special FPM seals guarantee safety and precision in use. With a rechargeable lithium battery that offers up to 2.5 hours of autonomy, and a convenient LED indicator for the charge level, the Isoplam electric pump is perfect for the most demanding industrial needs. The ergonomic handle with on/off button and the adjustable shoulder strap ensure comfortable and practical use in any situation. Professional sprayers are sold complete with a multilingual instruction booklet.

The Isoplam 10000 ml pre-compression manual sprayer is practical to use and is very useful in professional activities where a pump with high resistance to aggressive chemical fluids is required. The Isoplam sprayer tank is made of PE polyethylene plastic with liquid level indicator; the nozzle is made of PP polypropylene; the pumping element is made of plastic; the needle spring, the needle, the handle and the valve are made of AISI 302 stainless steel; the pump is equipped with an adjustable shoulder strap and a comfortable handle for transport and to better support the weight of the full pump; it is supplied with a 1.2 m long flexible hose, a 40 cm rigid lance with an adjustable polypropylene spray nozzle and a pressure relief valve set at 3 bar; the o-ring gasket is made of FPM fluorocarbon, a high-performance rubber suitable for use with highly aggressive products (medium solutions up to approximately 20% of hydrochloric acid, caustic soda, bleach, whitewash, disinfectants, petrol, diesel fuel, quicklime , detergents, herbicides, petroleum-based hydraulic oils, synthetic hydraulic oils, ethyl alcohol, white spirit, sea water). The pump is not resistant to acetone, ammonia, solvents, trichlorethylene, lacquers. The manual piston vaporizer can deliver at a maximum pressure of 3 bar and has an adjustable jet that can be oriented in all directions. The single capacity delivered by the nebulizer at a pressure of 2 bar is 0.37 L/minute, with a maximum jet width of 60°. The pumps are reusable, taking care to wash them after each use and run them for a few minutes with clean water. The professional sprayers are sold complete with a multilingual instruction booklet.

The Isoplam 12000 ml pre-compression manual sprayer is practical to use and is very useful in professional activities where a pump with high resistance to aggressive chemical fluids is required. The Isoplam sprayer tank is made of PE polyethylene plastic with liquid level indicator; the nozzle is made of PP polypropylene; the pumping element is made of plastic and equipped with a floating OR and hydraulic agitator; the needle spring, the needle, the handle and the valve are made of AISI 302 stainless steel; the pump is equipped with adjustable backpack shoulder straps and a metal control lever; it is supplied with a 1.2 m long flexible hose, a 40 cm ambidextrous rigid lance with an adjustable polypropylene atomizing nozzle and a pressure relief valve set at 6 bar; the o-ring gaskets are made of FPM fluorocarbon, a high-performance rubber suitable for use with highly aggressive products (medium solutions up to approximately 20% of hydrochloric acid, caustic soda, bleach, whitewash, disinfectants, petrol, diesel, quicklime , detergents, herbicides, petroleum-based hydraulic oils, synthetic hydraulic oils, ethyl alcohol, white spirit, sea water). The sprayer pump is not resistant to acetone, ammonia, solvents, trichlorethylene, lacquers. The manual piston vaporizer can deliver at a maximum pressure of 3 bar and has an adjustable jet and adjustable in all directions. The single capacity delivered by the nebulizer at a pressure of 2 bar is 0.37 l/minute, with a maximum jet width of 60°. The pumps are reusable, taking care to wash them after each use and run them for a few minutes with clean water. The professional sprayers are sold complete with a multilingual instruction booklet.